你好,欢迎来到常州蓝 阳环保设备有限公司!

座机号码: 0519-81660866

24小时热线: 132-7039-3000

环保知识

您所在的位置:首页 > 新闻资讯 > 环保知识 > 正文

针对废 气处理活性炭吸附塔工艺流程、工作原理及应用

作者: 来源: 日期:2016-7-23 9:34:34 人气:0 评论:0


1、工艺流程

2016070409482880.png

2016070409483623.png


2、活性炭的吸附原理

吸附现 象是发生在两个不同的相界面的现象,吸附过 程就是在界面上的扩散过程,是发生 在固体表面的吸附,这是由 于固体表面存在着剩余的吸引而引起的。


吸附可 分为物理吸附和化学吸附;物理吸 附亦称范德华吸附,是由于 吸附剂与吸附质分子之间的静电力或范德华引力导致物理吸附引起的,当固体 和气体之间的分子引力大于气体分子之间的引力时,即使气 体的压力低于与操作温度相对应和饱和蒸气压,气体分 子也会冷凝在固体表面上,物理吸 附是一种吸热过程。


化学吸 附亦称活性吸附,是由于 吸附剂表面与吸附质分子间的化学反应力导致化学吸附,它涉及 分子中化学键的破坏和重新结合,因此,化学吸 附过程的吸附热较物理吸附过程大。


在吸附过程中,物理吸 附和化学吸附之间没有严格的界限,同一物 质在较低温度下往往是化学吸附。活性炭 纤维吸附以物理吸附为主,但由于 表面活性剂的存在,也有一 定的化学吸附作用。



3、工艺说明


车间有 机废气通过吸气罩收集,在排风机作用下,经过管 道输送进入干式过滤器,再进入 活性炭吸附装置,有机污 染物被活性炭吸附,净化后 的气体经风机增压后达标排放。


活性炭吸附饱和后,请专业 厂家再生后回用。


1, process


2, activated carbon adsorption principle

Adsorption phenomenon is the phenomenon occurs in two distinct phase interface, the adsorption process is the diffusion process at the interface, adsorption occurs at a solid surface, which is due to the existence of the remaining solid surface attraction caused.


Can be divided into physical adsorption and chemical adsorption; physical adsorption, also known as the van der Waals adsorption is due to the electrostatic force between the adsorbent and adsorbate molecules or van der Waals attraction leads to physical adsorption caused when the molecular attraction between the solid and gas is greater than the gas when the attractive force between molecules, even if the operating pressure of the gas is lower than the temperature corresponding to the saturated vapor pressure, will condense the gas molecules on a solid surface, physical adsorption is an endothermic process.


Also known as chemisorption active adsorption, chemical reaction force due to the surface of the adsorbent and adsorbate molecules cause chemical adsorption, which involves the destruction of chemical bonds in molecules and recombine, therefore, the heat of adsorption chemisorption process relatively large physical adsorption process.


In the adsorption process, there is no strict boundaries between physical and chemical adsorption, chemisorption is often the same substance at lower temperatures. Activated Carbon Fiber physical adsorption based, but due to the presence of a surfactant, there are certain chemical adsorption.


3, process description

Drag organic waste collected by the hood, under the effect of the exhaust fan through the pipeline entering the dry filter, and then into the activated carbon adsorption unit, activated carbon adsorption of organic pollutants, the purified gas booster fan after discharge.


After the activated carbon adsorption saturation, please post professional manufacturers Reuse.


上一篇:没有啦

下一篇: 含硫恶 臭废气治理方法

关闭
关闭

蓝阳环保CCTV央视宣传片

友情链接:    麦乐迪棋牌   博鸿彩票   如意阁彩票   奇奇棋牌app   长隆彩票